DJI Inspire 3
Professional Cinema Drone
Master The Unseen
The DJI Inspire 3 is a professional cinema drone built for high-end film, television, commercial production, and aerial cinematography. Its full-frame X9-8K Air camera, RTK positioning, advanced flight planning, dual-control system, and integrated sensing give production teams a platform designed around both camera movement and precise aircraft control.
The Definition of Power and Performance
Inspire 3 supports full-frame 8K recording, interchangeable DJI DL lenses, 360° gimbal pan, Tilt Boost, Waypoint Pro, and repeatable flight paths for productions that require controlled, consistent aerial shots.
Terra Excel Drones supplies DJI Inspire 3 professional cinema drone solutions in Alberta and across Canada and can help filmmakers and production teams compare aircraft, lenses, accessories, and workflow requirements.
DJI Inspire 3 Flight Performance and Camera Movement
Sleek, Integrated Design
The Inspire 3 combines a streamlined airframe with responsive flight performance designed around professional aerial cinematography.
Up to 28 min maximum flight time*
8 m/s maximum ascent speed
8 m/s maximum vertical descent speed
10 m/s maximum tilt descent speed
14 m/s maximum in-flight wind resistance
The FPV camera, visual sensors, positioning antennas, and storage card slot are integrated into the airframe to reduce unnecessary external components and support the Inspire 3’s aerodynamic design.
Its transformable configuration supports 360° Pan, Tilt Boost, and Travel Mode. With the landing gear lowered, Tilt Boost gives the gimbal an obstruction-free upward shooting angle of up to 80°, giving cinematographers greater freedom when framing moving subjects, structures, and overhead shots.
Tilt Boost
360° Pan
Travel Mode
Industrial Design
The Inspire 3 was designed as an integrated cinema platform, with its aircraft structure, sensing system, positioning hardware, camera system, and flight components built around professional aerial production requirements.
Centimeter-Level RTK Positioning
The Inspire 3 integrates RTK positioning to support precise aircraft movement and repeatable flight paths for professional production workflows.
With an RTK fix, DJI specifies positioning accuracy of 1 cm + 1 ppm horizontally and 1.5 cm + 1 ppm vertically.
High-Mobility Precision Flight System
Dual-Antenna RTK Positioning
Inspire 3 uses integrated RTK antennas at the front and rear of the aircraft. The stacked ceramic antenna design supports GPS, BeiDou, and Galileo along with dual-frequency positioning.
Operators can connect to an RTK network or use a D-RTK 2 Mobile Station without adding an external RTK module to the aircraft.
The dual-antenna design also helps improve orientation accuracy and resistance to magnetic interference during precision flight operations.
Waypoint Pro for Planned Camera Moves
Waypoint Pro gives cinematographers tools for planning both the aircraft route and the shot before or during production.
It combines route planning with Inspire 3’s RTK positioning to support controlled, repeatable camera movement across complex production environments.
Customizable Obstacle Sensing
Inspire 3 allows operators to independently enable or disable horizontal, upward, and downward obstacle sensing based on the requirements of the shot.
Obstacle alert ranges can also be adjusted for different production environments.
When active avoidance is turned off, operators can still view obstacle distance information on the navigation display and receive audible alerts when the aircraft enters a defined range, without the system automatically changing the aircraft’s movement.
Repeatable Routes
Repeatable Routes allows Inspire 3 to fly the same planned route while maintaining parameters such as altitude, speed, gimbal angle, and camera settings.
This supports repeatable camera moves, matching shots captured at different times, and long-duration sequences where consistency between flights matters.
3D Dolly
3D Dolly creates a planned flight path that the operator can move along manually, similar to working with a crane, cable camera, or dolly.
The operator can control movement along that route while adjusting speed, gimbal angle, and other shot parameters, providing greater freedom when building complex cinema-style camera movements.
DJI Inspire 3 Spotlight Pro
Spotlight Pro uses automated subject recognition and tracking to help keep people, vehicles, and boats framed during complex aerial shots.
The system can reduce the amount of manual framing required, giving solo operators and production crews more flexibility when planning moving shots.
Follow Mode
In Follow Mode, the aircraft and gimbal camera remain oriented toward the tracked subject. This allows the pilot to capture circling and moving shots while Spotlight Pro maintains framing.
Free Mode
Free Mode separates the aircraft’s flight direction from the gimbal camera.
The camera can remain locked on the subject using the Inspire 3’s 360° gimbal pan while the pilot uses the FPV camera to manage the flight path and surrounding environment.
DJI Inspire 3 Omnidirectional Sensing
The Inspire 3 uses nine visual sensors to provide obstacle sensing around the aircraft and support greater situational awareness during flight.
Fisheye cameras built into each of the four landing arms help maintain horizontal obstacle sensing as the aircraft changes configuration.
Their placement reduces obstruction from the airframe when the landing gear is raised and continues supporting horizontal sensing when the landing gear is lowered.
DJI Inspire 3 Ultra-Wide Night-Vision FPV Camera
The Inspire 3 uses a 1/1.8-inch FPV camera sensor with a 3 μm pixel size, a 161° diagonal field of view, and live video transmission up to 1080p/60fps.
The wider field of view and improved low-light performance give pilots a clearer view of the aircraft’s surroundings while framing and navigating, including during nighttime and low-light shoots.
Inspire 3 vs. Inspire 2 FPV Camera
Inspire 3
1/1.8-inch sensor
161° diagonal field of view
1080p/60fps live feed
Inspire 2
1/7.5-inch sensor
84° diagonal field of view
480p/30fps live feed
DJI X9-8K Air
Full-Frame Camera
Built specifically for the Inspire 3, the X9-8K Air gives aerial production teams a full-frame cinema camera designed to capture high-resolution footage directly from the aircraft.
With DJI’s CineCore 3.0 processing system, the camera supports:
Up to 8K/75fps Apple ProRes RAW internal recording
Up to 8K/25fps CinemaDNG internal recording
That combination gives filmmakers more image information to work with in post-production, especially when colour grading, reframing shots, matching footage across cameras, or building visual effects into a project.
Full-Frame 4K/120fps Recording
In S&Q mode, the X9-8K Air supports full-frame 4K/120fps ProRes RAW recording without cropping, giving cinematographers additional options for high-resolution slow-motion footage.
DJI X9-8K Air Dual Native ISO
The X9-8K Air supports dual native ISO for greater flexibility across different lighting conditions and frame rates.
At full-frame recording speeds of 30fps and below, the camera offers EI 800/4000. Above 30fps, EI 320/1600 is available.
This gives cinematographers greater flexibility when working in low-light environments while helping preserve image detail and control noise.
14+ Stops of Dynamic Range
The X9-8K Air captures more than 14 stops of dynamic range, helping preserve detail across bright highlights and deep shadows in challenging lighting conditions.
The additional latitude gives production teams greater flexibility during colour grading and exposure adjustments in post-production.
EI Grayscale (30fps and below)
EI Grayscale (above 30fps)
DL Mount Lenses
The X9-8K Air uses DJI’s DL mount and supports a range of lightweight full-frame lenses designed for aerial cinematography.
DL 18 mm F2.8 ASPH
DL 24 mm F2.8 LS ASPH
DL 35 mm F2.8 LS ASPH
DL 50 mm F2.8 LS ASPH
DL 75 mm F1.8
The lens lineup gives production teams options ranging from ultra-wide aerial perspectives to tighter telephoto framing without changing the Inspire 3 camera platform.
DJI Inspire 3
Dual-Control System
The Inspire 3 supports independent dual control, allowing two remote controllers to receive live feeds and control the aircraft separately.
This gives the pilot and gimbal operator greater flexibility to work from different positions on set.
If the pilot loses the aircraft signal, the gimbal operator can take control of the Inspire 3 to return the aircraft to home or land safely.
Interconnected
Production Ecosystem
O3 Pro Video Transmission and Control System
The O3 Pro system connects the Inspire 3, camera, and remote controllers within the production workflow, supporting live video transmission and independent control for the pilot and gimbal operator.
This gives production teams a more flexible way to coordinate aircraft movement, camera operation, and monitoring during complex aerial shoots.
DJI RC Plus
The DJI RC Plus features a 7-inch, 1,200-nit high-brightness display for monitoring footage and flight information outdoors.
It also includes an HDMI output along with physical buttons and dials positioned across the controller for quick access during operation. Controls can be customised to suit different operators and production workflows.
DJI Inspire 3 FAQs
Common questions about the DJI Inspire 3, answered by Terra Excel Drones.
What is the DJI Inspire 3 used for?
The DJI Inspire 3 is a professional cinema drone designed for film, television, commercial production, and high-end aerial cinematography. It combines a full-frame 8K camera with precision flight and production tools built for professional crews.
Can the DJI Inspire 3 record in 8K?
Yes. The X9-8K Air supports internal recording of up to 8K/75fps Apple ProRes RAW and 8K/25fps CinemaDNG, along with full-frame 4K/120fps ProRes RAW in S&Q mode.
Can the DJI Inspire 3 repeat the same flight path?
Yes. Repeatable Routes allows Inspire 3 to repeat a planned route while maintaining settings such as altitude, speed, gimbal angle, and camera parameters. Integrated RTK positioning helps support consistent aircraft movement between flights.
What lenses can be used with the DJI Inspire 3?
The X9-8K Air uses DJI’s DL mount and supports 18 mm, 24 mm, 35 mm, 50 mm, and 75 mm full-frame lenses, giving production teams options for both wide aerial views and tighter framing.
How long can the DJI Inspire 3 fly?
DJI lists a maximum flight time of up to 28 minutes under specified test conditions. Actual flight time varies based on aircraft configuration, flight conditions, camera use, and the operating environment.
Where can I buy the DJI Inspire 3 in Canada?
Terra Excel Drones can help filmmakers and production teams in Alberta and across Canada compare Inspire 3 configurations, compatible lenses, accessories, and workflow requirements.
Buy the DJI Inspire 3
in Canada
Choosing the right Inspire 3 setup depends on the production workflow, camera requirements, and type of aerial cinematography you need to capture.
Terra Excel Drones can help filmmakers and production teams in Alberta and across Canada compare DJI Inspire 3 configurations, compatible lenses, accessories, and workflow requirements for professional aerial production.
Your DJI Authorized Reseller in Alberta.
Phone: 1 (780) 924 3525 · Toll Free: (877) 383 1974
info@terraexceldrones.com
11602 88 Ave #176, Fort Saskatchewan, AB T8L-0K1
